Your location: Home >> NEWS


Contact OLYS



  • Tel:0086-755-29533796
  • E-mail:Kelly@olys-digital.com
  • Skype:kellyrosa1982
  • www:www.olyssolar.com
  • Address:5 floor, B building of Sheng De Industrial Park,Lang Kou, Da Lang, Long Hua New district, Shenzhen City, China

OLYS Battery Isolator Function Introduction

Article source: Popularity:638 Editor in charge: Release date:2021-12-23

OLYS battery isolator function introduction:

   1. BIS series battery isolator can charge 3 batteries simultaneously through a alternators(or a single output battery charger). The 3 batteries do not have to be connected in parallel, but can be connected to 3 output ports separately. When one battery is discharged and used, it will not consume the power of other batteries

   2. The FET Battery Isolator adopts MOS switching technology. Compared with the traditional diode isolator, it has lower voltage loss. When charging with low current, the input and output voltage loss is only 0.02v, and when charging with high current,the average voltage loss is only 0.1V. It has absolute advantages

   3. With Alternator energize input ,Some alternators need DC voltage on the B+ output to start charging. Obviously, DC will be present when the alternator is directly connected to a battery. Inserting a Diode or FET splitter will however prevent any return voltage/current from the batteries to the B+, and the alternator will not start, Our new isolators feature a special current limited energize input that will power the B+ when the engine run / stop switch is closed.

   4. 12V / 24V automatic identification, make sure the Alternator's output voltage is same as battery working voltage

   5. All aluminum alloy shell and all glue filling process are adopted to ensure reliability and durability